Back to CCTV Cameras

Walkthrough Gate

Technical Features:
•Weight: 60 kg
•Gross Weight: 77 kg
•Ambient Temperature: -20°C to +70°
•Operating voltage:70VAC – 270VAC / 50Hz – 60Hz
•Power: 10W Stand By- 20W (Alarm)
NetPassage: 740x680x2000
External: 850x680x2200 mm
Package Dimensions (W x L x H):
Box 1: 810 x 2350 x 210 mm (65 kg)
Box 2: 250 x 800 x 270 mm (12 kg)


International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS


  • Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
  • Multi-Zone – 9 Real Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right)
  • Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Sta can easily understand


  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.
  • Can detect test objects both individually and in combination. •Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators


  • Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.


  • No Interferences between Zones and No False Alarms •Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top


  • Detects Metals regardless their orientation


  • 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 Standard preset International Security Program


  • Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
  • Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit


  • Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By •Human Health friendly Very Low Frequency VLF technology, No a ects to Pace Makers, Pregnant and Magnetic Media •Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels


  • Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen
  • Visual display of magnetic interference from environment


  • 10 Adjustable audio tones with 10 volume levels (enabling Mute Operation)


  • IP 44 Protection Level (IP 65 optinal) (EN 60529)


  • Five Digit Incoming/ Outgoing traffic counter (can be made invisible)


  • Alarms counted seperately


  • Interference free Operation from other Electronic Devices and Does Not a ect other Electronic Equipments. Necessary ltering precautions have been taken.


  • Four-digit changeable digital Pin Code + Mechanical Lock •Automatic Failure Display Function with continous self checking of key parameters (BITE – Built In test Equipment)


  • Reloading the factory default settings by one-touch button •Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)
  • 4 Menu Languages, Standard menu in English, German, Spanish and Turkish


  • Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms
  • STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains


  • No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)
  • Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design •Manufactured for 7/24 Continuous Operation


  • 74 cm Net Passage Width and 200 cm Net Passage Height •Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects


  • Audio-Visual alarms are noticeable at a range of 4 meters •Micro-Processor Settings do not change when there is an electricity cut-o


  • No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices


  • All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units. •Corrosion Resistant ABS Footers for sturdy placement and durable use.


  • Resistant to Vibration & Impact


  • Optional -SCADA Software-Controlled remote data communica-


tion and Networking of Multiple Metal Detectors; Software to


Change settings by PC (Digital output for Network Connection)


  • Manufactured using the latest technology and advanced components


There are no reviews yet.

Be the first to review “Walkthrough Gate”

Your email address will not be published. Required fields are marked *